Fxamps – Amps and tubes https://www.ampsandtubes.com Best of guitar tube amplification in Europe Thu, 09 Apr 2026 06:45:10 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.ampsandtubes.com/wp-content/uploads/2024/07/cropped-LogoBoutonBlack-32x32.png Fxamps – Amps and tubes https://www.ampsandtubes.com 32 32 Pedalboard https://www.ampsandtubes.com/shop/pedalboard/ https://www.ampsandtubes.com/shop/pedalboard/#respond Sat, 13 Sep 2025 10:10:54 +0000 https://www.ampsandtubes.com/?post_type=product&p=5390 Built to order. Building time : approx [cgv cabtime] weeks.]]>

look maters

Tired of having your pedals lying on the floor, or on an ugly black pedalboard?

Get some colors and a nice touch with our new tolexed pedalboard.

Various finishes

Lots of possible finishes, using the same materials as our amplifiers, so you can get a nice matching set along your amplifier and cabinet.

Lots of options

Get a simple and light pedalboard for your living room, or a full featured tour-ready one for your live needs.
Handles, cover, second floor, quick connections, everything is possible.

Finish : Customers choice  > Click to see our options <

Features : Optional handles. Optional cover.

Connections : Optional power supply connection with illuminated switch. Optionnal connection for guitar input and amp output.

Construction : 15mm high quality plywood, finger joint assembly.

Dimensions : 65cm wide, 35cm deep, 10cm high & 4kg

]]> https://www.ampsandtubes.com/shop/pedalboard/feed/ 0 Tweedy https://www.ampsandtubes.com/shop/tweedy/ https://www.ampsandtubes.com/shop/tweedy/#comments Tue, 09 Sep 2025 07:45:38 +0000 https://www.ampsandtubes.com/?post_type=product&p=5332 Build to Order. Building time : approx [cgv amptime] weeks.]]>

2w/20w selector

Ultralinear master volume

Tweedy

Spice up your sound

Wild tweed sounds, raw and fuzzy, for all southern blues style, ZZ’ style!

In the early days of blues music, tweed covered amp from a famous US brand were all the rage.

With their hot and raw temperament, they basically invented the US southern blues sound.

Sound is going from a warm bluesy clean at the start of the GAIN course, to a fuzzy wild overdrive when pushed above 8/10.

The TONE control range from a felted warm sound to a more aggressive/bleeding character.

The BRIGHT switch give the amp a slightly bright push, ideal for clean playing with single coil pickups.

Finally the DEEP switch can give a little boost in the low mid, usefull for some loudspeaker.

Features

Quiet play

The Tweedy has the special « ultralinear master volume » technology, designed to play at any level, even at very low level at night. That master volume is very progressive, and easy to set even at low level. There is no jump in level like with a typical master volume, and it remains progressive until the end of the course. The amp also has a 20w/2w for the most quiet conditions, with a slight frequency correction in 2w mode to compensate for the bright response of some speakers at low level.

No Bias System

Change your tubes yourself, at home, no equipment needed. Freely choose between 6L6 and EL34 power tubes, you can even mix a 6L6 and an EL34. Procedure is quick, easy, and without risk. This will save you hundreds in maintenance every year, and will allow you to test many tube brands and combinations.

Big tubes

Were other amps uses cheaper EL84 tubes to get 20w, all FX amplifiers uses big EL34 or 6L6 tubes, just like the big 100w stack amps. These big tubes give a more massive sound, with increased bass response, even a low level. BIG TUBES = BIG SOUND!

Smart connections

The head version (and reverse head) features two speaker outputs in parallel, along with a 4/8/16 ohms impedance selector. This allows a variety of possible connections, with one or two cabinets from various impedances.

The combo version offers exactly the same outputs, and the speaker is externally connected (cable included). This allows for multiple smart connections. You can use the internal speaker alone, internal speaker + external cabinet, one external cabinet only, two external cabinets. It also allows the use of an attenuator with internal speaker or external cabinet, and the use of a loadbox for silent recording. Finally you can also use the combo as a cabinet for an external amplifier (In that case, turn off the amplifier section of the combo!!!)

DC tube heating

Heating tubes with DC current is quiter than the usual AC wiring. It takes more time to wire, and it’s a little bit more expensive, but it’s really worth it. Your Fx amplifier is guaranteed to be as quiet as possible.

Specifications

Finish : Customers choice.

Controls : Gain/Tone/Volume + bright + deep + loud/quiet.

Features : Tube buffered effect loop, 16/8/4 ohms selector + 2x speaker outputs in parallel.

Power : Single ended, Class A, 20w switchable to 2w. Available in 115v or 230v.

Tubes : 2x 12ax7 + 2x 6L6. User swappable/mixable EL34/6L6 power tube, no bias needed.

Construction : Point to point, handwired.

Dimensions : 50cm wide, 22cm high, 21cm deep & 13kg

Recommended speaker : Celestion A-Type or Celestion Alnico Gold.

Gain
Vintage -> Modern

FAQ / Manuals

How can I replace my tube?

Changing tubes in your Fx amplifier is very simple.

First unplug the amp, and let it sit for few seconds unplugged. If the amp had been recently used, wait for a while for the tubes to cool down, as they can become very hot!

Remove the back plate by unscrewing the 4 screws.

Remove existing tube by pulling it upward, and gently moving it left/right.

Place the new tube by simply plugging it, while taking care of the orientation of the tube. Preamp tubes have 9 pins, and a void, so rotate the tube to align the pins with the holes in the socket. Power tubes have 8 pins, and a central part with a small bump. That small bump should be align with a matching cut into the center of the socket to ensure proper placement.
DO NOT FORCE TOO MUCH, it should get in place pretty easily.

That’s it, no BIAS setting or anything else required, you’re good to go!

How to plug my amp to a cab?

To use your amplifier, you need a cabinet (or a loadbox, but it works the same way).

Fx amplifiers provide two speaker outputs, in parallel. You can use one or the other, or both.

When using a single cabinet, simple set the impedance selector to match the impedance of your cabinet.

When using two cabinets, please use two cabinets with the same impedance, and set the selector impedance to half the impedance of a cabinets, ie if you have two 16ohms cabinets plugged, set the impedance selector to 8ohms.

Fx combo amplifiers are not internally wired, to allow for a variety of possible connexions, so you must use an external speaker cable to connect the amplifier block to the internal speaker, or to an external one. You can also use the internal speaker + an external one, or two external speakers. In that case just follow the impedance rule given above.

ALWAYS CONNECT A SPEAKER BEFORE USE.

ONLY USE A DEDICATED SPEAKER CABLE. Do not use simple guitar cable, or any other kind of cable.

Demos

Some amps we built.

]]> https://www.ampsandtubes.com/shop/tweedy/feed/ 1 Suprah https://www.ampsandtubes.com/shop/suprah/ https://www.ampsandtubes.com/shop/suprah/#respond Thu, 08 Aug 2024 08:15:56 +0000 https://www.ampsandtubes.com/?post_type=product&p=4963 Build to Order. Building time : approx [cgv amptime] weeks.]]>

Bright switch

Deep switch

Ultralinear master volume

2w/20w switch

Suprah

Pedalboard's friend

Your ideal pedals platform.
Inspired by the famous super reverb amp, the Suprah is capable of nice blackface cleans to light crunches, and it can also be dialed to get a neutral clean to use overdrive/distortions in front of the amp, with plenty of headroom.

Features

Quiet play

The Suprah has the special « ultralinear master volume » technology, designed to play at any level, even at very low level at night. That master volume is very progressive, and easy to set even at low level. There is no jump in level like with a typical master volume, and it remains progressive until the end of the course. The amp also has a 20w/2w for the most quiet conditions, with a slight frequency correction in 2w mode to compensate for the bright response of some speakers at low level.

No Bias System

Change your tubes yourself, at home, no equipment needed. Freely choose between 6L6 and EL34 power tubes, you can even mix a 6L6 and an EL34. Procedure is quick, easy, and without risk. This will save you hundreds in maintenance every year, and will allow you to test many tube brands and combinations.

Big tubes

Were other amps uses cheaper EL84 tubes to get 20w, all FX amplifiers uses big EL34 or 6L6 tubes, just like the big 100w stack amps. These big tubes give a more massive sound, with increased bass response, even a low level. BIG TUBES = BIG SOUND!

Smart connections

The head version (and reverse head) features two speaker outputs in parallel, along with a 4/8/16 ohms impedance selector. This allows a variety of possible connections, with one or two cabinets from various impedances.

The combo version offers exactly the same outputs, and the speaker is externally connected (cable included). This allows for multiple smart connections. You can use the internal speaker alone, internal speaker + external cabinet, one external cabinet only, two external cabinets. It also allows the use of an attenuator with internal speaker or external cabinet, and the use of a loadbox for silent recording. Finally you can also use the combo as a cabinet for an external amplifier (In that case, turn off the amplifier section of the combo!!!)

DC tube heating

Heating tubes with DC current is quiter than the usual AC wiring. It takes more time to wire, and it’s a little bit more expensive, but it’s really worth it. Your Fx amplifier is guaranteed to be as quiet as possible.

Specifications

Finish : Customers choice.

Controls : Gain/Bass/Mid/Treble/Volume + bright + deep + loud/quiet.

Features : Tube buffered effect loop, 16/8/4 ohms selector + 2x speaker outputs in parallel.

Power : Single ended, Class A, 20w switchable to 2w. Available in 115v or 230v.

Tubes : 2x 12ax7 + 2x 6L6. User swappable/mixable EL34/6L6 power tube, no bias needed.

Construction : Point to point, handwired.

Dimensions : 50cm wide, 22cm high, 21cm deep & 13kg

Recommended speaker : Celestion A-Type or Celestion V-Type.

Gain
Vintage / Modern

Demos

Some amps we built.

]]> https://www.ampsandtubes.com/shop/suprah/feed/ 0 Custom 1ch https://www.ampsandtubes.com/shop/custom-1ch/ https://www.ampsandtubes.com/shop/custom-1ch/#respond Fri, 02 Aug 2024 08:57:09 +0000 https://www.ampsandtubes.com/?post_type=product&p=4832 Build to Order. Building time : approx [cgv customtime] weeks.]]>

CUSTOM AMPLIFIER

Your style, your sound

Can’t find what you’re looking for in our already vast offer?
Don’t worry, we can do even more!

Starting from our existing 20w/2w platform, we can adapt it to a variety of sounds and style.
Create your own ultimate single channel amplifier!
You can chose your own channel, add a custom designed faceplate, possibilities are endless.

Quiet play

Custom designed amplifier will embed our special “ultralinear master volume” technology, designed to play at any level, even at very low level at night. It even has a 20w/2w for the most quiet conditions.

No Bias System

Change your tubes yourself, at home, no equipment needed. Freely choose between 6L6 and EL34 power tubes, you can even mix a 6L6 and an EL34.

Specifications

Finish : Customers choice  > Click to see our options <

Controls : Depends on channels choice.

Features : Tube buffered effect loop, 16/8/4 ohms selector + 2x speaker outputs.

Power : Single ended, Class A, 20w switchable to 2w. Available in 115v or 230v.

Tubes : 3x 12ax7 + 2x EL34. User swappable/mixable EL34/6L6 power tube, no bias needed.

Construction : Point to point, handwired.

Dimensions : 50cm wide, 22cm high, 21cm deep & 13kg

Some amps we built

]]> https://www.ampsandtubes.com/shop/custom-1ch/feed/ 0 Dual Custom https://www.ampsandtubes.com/shop/custom-2ch/ https://www.ampsandtubes.com/shop/custom-2ch/#respond Fri, 02 Aug 2024 08:38:24 +0000 https://www.ampsandtubes.com/?post_type=product&p=4810 Build to Order. Building time : approx [cgv customtime] weeks.]]>

DUAL CUSTOM

Your style, your sound

Can’t find what you’re looking for in our already vast offer?
Don’t worry, we can do even more!

Starting from our existing 20w/2w platform, we can adapt it to a variety of sounds and style.
Create your own ultimate 2 channels amplifier!
You can chose and mix 2 totally different channels, add a custom designed faceplate, possibilities are endless.

Quiet play

Custom designed DUAL will embed our special “ultralinear master volume” technology, designed to play at any level, even at very low level at night. It even has a 20w/2w for the most quiet conditions.

No Bias System

Change your tubes yourself, at home, no equipment needed. Freely choose between 6L6 and EL34 power tubes, you can even mix a 6L6 and an EL34.

Specifications

Finish : Customers choice  > Click to see our options <

Controls : Will depends on channels choice.

Features : Tube buffered effect loop, 16/8/4 ohms selector + 2x speaker outputs.

Power : Single ended, Class A, 20w switchable to 2w. Available in 115v or 230v.

Tubes : 4x 12ax7 + 2x EL34. User swappable/mixable EL34/6L6 power tube, no bias needed.

Construction : Point to point, handwired.

Dimensions : 50cm wide, 22cm high, 21cm deep & 13kg

Some amps we built

]]> https://www.ampsandtubes.com/shop/custom-2ch/feed/ 0 DOS https://www.ampsandtubes.com/shop/dos/ https://www.ampsandtubes.com/shop/dos/#respond Thu, 01 Aug 2024 11:14:12 +0000 https://www.ampsandtubes.com/?post_type=product&p=4759
The most famous boutique amps of all. Build to Order. Building time : approx [cgv amptime] weeks.
]]>

D.O.S.

The most famous boutique amps of all.

The typical “pumping” clean sound up to a nice warm overdrive.

Features

Real Stack

The D.O.S. introduce the new Real Stack technology. The Real Stack is the natural evolution of our constant quest to recreate the sound and feeling from a big 100w into a more suitable 20w format that modern guitarists can use small gig as well at home.

Super touch sensitive, very reactive to your playing, just like the original.

No Bias System

Change your tubes yourself, at home, no equipment needed. Freely choose between 6L6 and EL34 power tubes, you can even mix a 6L6 and an EL34. Procedure is quick, easy, and without risk. This will save you hundreds in maintenance every year, and will allow you to test many tube brands and combinations.

Big tubes

Where other amps uses cheaper EL84 tubes to get 20w, all FX amplifiers uses big EL34 or 6L6 tubes, just like the big 100w stack amps. These big tubes give a more massive sound, with increased bass response, even a low level. BIG TUBES = BIG SOUND!

Smart connections

The head version (and reverse head) features two speaker outputs in parallel, along with a 4/8/16 ohms impedance selector. This allows a variety of possible connections, with one or two cabinets from various impedances.

The combo version offers exactly the same outputs, and the speaker is externally connected (cable included). This allows for multiple smart connections. You can use the internal speaker alone, internal speaker + external cabinet, one external cabinet only, two external cabinets. It also allows the use of an attenuator with internal speaker or external cabinet, and the use of a loadbox for silent recording. Finally you can also use the combo as a cabinet for an external amplifier (In that case, turn off the amplifier section of the combo!!!)

DC tube heating

Heating tubes with DC current is quiter than the usual AC wiring. It takes more time to wire, and it’s a little bit more expensive, but it’s really worth it. Your Fx amplifier is guaranteed to be as quiet as possible.

Specifications

Finish : Customers choice.

Controls : Gain/Bass/Mid/Treble/Volume + bright.

Features : 16/8/4 ohms selector + 2x speaker outputs in parallel.

Power : Single ended, Class A, 20w switchable to 2w. Available in 115v or 230v.

Tubes : 3x 12ax7 + 2x 6L6. User swappable/mixable EL34/6L6 power tube, no bias needed.

Construction : Point to point, handwired.

Dimensions : 50cm wide, 22cm high, 21cm deep & 13kg

Recommended speaker : Celestion g12m Alnico Gold.

Gain
Vintage -> Modern

Some amps we built

]]> https://www.ampsandtubes.com/shop/dos/feed/ 0 Bad Train https://www.ampsandtubes.com/shop/badtrain/ https://www.ampsandtubes.com/shop/badtrain/#respond Thu, 01 Aug 2024 10:35:06 +0000 https://www.ampsandtubes.com/?post_type=product&p=4749
The famous boutique wrecked amp is back. Build to Order. Building time : approx [cgv amptime] weeks.
]]>

Bad train

The famous boutique wrecked amp is back.

Crystal cleans to fuzzy crunches, with tons of dynamics.

Real Stack

The Bad Train uses our new Real Stack technology. Real Stack is the natural evolution of our constant quest to recreate the sound and feeling from a big 100w into a more suitable 20w format that modern guitarists can use small gig as well at home.

Super touch sensitive, very reactive to your playing, just like the original.

No Bias System

Change your tubes yourself, at home, no equipment needed. Freely choose between 6L6 and EL34 power tubes, you can even mix a 6L6 and an EL34.

Specifications

Finish : Customers choice  > Click to see our options <

Controls : Gain/Bass/Mid/Treble/Volume + bright

Features : Tube buffered effect loop, 16/8/4 ohms selector + 2x speaker outputs.

Power : Single ended, Class A, 20w switchable to 2w. Available in 115v or 230v.

Tubes : 3x 12ax7 + 2x EL34. User swappable/mixable EL34/6L6 power tube, no bias needed.

Construction : Point to point, handwired.

Dimensions : 50cm wide, 22cm high, 21cm deep & 13kg

Recommended speaker : Celestion Alnico Gold (Fxamps 1×12″ classic).

Gain
Vintage / Modern

Some amps we built

]]> https://www.ampsandtubes.com/shop/badtrain/feed/ 0 Brittany https://www.ampsandtubes.com/shop/brittany/ https://www.ampsandtubes.com/shop/brittany/#respond Thu, 13 Oct 2022 06:53:56 +0000 https://www.ampsandtubes.com/?post_type=product&p=3637
Our take on the famous boutique classe A british amplifier. From chimey cleans to raw crunches, cover all the british pop classics. Build to Order. Building time : approx [cgv amptime] weeks.
]]>

Bright switch

Deep switch

Ultralinear master volume

2w/20w switch

Brittany

British boutique

Our take on the famous boutique classe A british amplifier.

From chimey cleans to raw crunches, cover all the classics from “where the streets have no name” to “tie your mother down”.

Features

Quiet play

The Brittany has the special « ultralinear master volume » technology, designed to play at any level, even at very low level at night. That master volume is very progressive, and easy to set even at low level. There is no jump in level like with a typical master volume, and it remains progressive until the end of the course. The amp also has a 20w/2w for the most quiet conditions, with a slight frequency correction in 2w mode to compensate for the bright response of some speakers at low level.

No Bias System

Change your tubes yourself, at home, no equipment needed. Freely choose between 6L6 and EL34 power tubes, you can even mix a 6L6 and an EL34. Procedure is quick, easy, and without risk. This will save you hundreds in maintenance every year, and will allow you to test many tube brands and combinations.

Big tubes

Were other amps uses cheaper EL84 tubes to get 20w, all FX amplifiers uses big EL34 or 6L6 tubes, just like the big 100w stack amps. These big tubes give a more massive sound, with increased bass response, even a low level. BIG TUBES = BIG SOUND!

Smart connections

The head version (and reverse head) features two speaker outputs in parallel, along with a 4/8/16 ohms impedance selector. This allows a variety of possible connections, with one or two cabinets from various impedances.

The combo version offers exactly the same outputs, and the speaker is externally connected (cable included). This allows for multiple smart connections. You can use the internal speaker alone, internal speaker + external cabinet, one external cabinet only, two external cabinets. It also allows the use of an attenuator with internal speaker or external cabinet, and the use of a loadbox for silent recording. Finally you can also use the combo as a cabinet for an external amplifier (In that case, turn off the amplifier section of the combo!!!)

DC tube heating

Heating tubes with DC current is quiter than the usual AC wiring. It takes more time to wire, and it’s a little bit more expensive, but it’s really worth it. Your Fx amplifier is guaranteed to be as quiet as possible.

Specifications

Finish : Customers choice.

Controls : Gain/Bass/Mid/Treble/Volume + bright + deep + loud/quiet.

Features : Tube buffered effect loop, 16/8/4 ohms selector + 2x speaker outputs in parallel.

Power : Single ended, Class A, 20w switchable to 2w. Available in 115v or 230v.

Tubes : 3x 12ax7 + 2x EL34. User swappable/mixable EL34/6L6 power tube, no bias needed.

Construction : Point to point, handwired.

Dimensions : 50cm wide, 22cm high, 21cm deep & 13kg

Recommended speaker : Celestion V-Type or Celestion Alnico Gold.

Gain
Vintage -> Modern

Demos

Some amps we built.

]]> https://www.ampsandtubes.com/shop/brittany/feed/ 0 Dual https://www.ampsandtubes.com/shop/dual/ https://www.ampsandtubes.com/shop/dual/#respond Mon, 22 Feb 2021 11:40:46 +0000 https://www.ampsandtubes.com/shop/dual/ Build to Order. Building time : approx [cgv amptime] weeks.]]>

Clean channel gain

Crunch channel gain

Lead channel gain

20w/2w switch

Clean channel bright switch

Clean channel EQ

Drive channels EQ

Drive channels volume

Dual

Best of both worlds

The DUAL combines the best of both worlds : US cleans with UK drives. And we also made it 3 channels, because why not?

Blackface cleans

The first channel is a clean/light crunch one, voiced like the famous blackface amps. Bright and hot, it’s really perfect for all kind of cleans, from jazz to blues, and even more modern styles. The 3-band tone stack is finely tuned to offer a great versatility, and the bright switch will accommodate a wide range of guitars. Perfect for clean arpeggios with a touch of delay in the effect loop, also capable of light-crunch bluesy sounds with the gain pushed, perfect with some spring style reverb.

Plexi crunches

The crunch channel is inspired by the famous plexi sounds, ranging from Jimmy to Angus. That canal is vintage sounding, slightly less aggressive than an original, and thus more versatile. No bright cap on this channel gives it a little warmer sound, perfect for using it as pedal platform too. That channel has is own gain, plus a 3-band tonestack and a dedicated volume, shared with the 3rd channel. The tonestack has been modded compared to an original plexi, to offer a wider range of controls, while keeping the unmistakable original plexi sound.

JCM leads

The last but not least channel is modeled after the sought after JCM circuits (the good ones!). It offers enough gain to cover the 80′ hard style, but still sounds great at lower settings. It can sound hard but still keeps a lot of definition, and has a great bass response,  allowing powerful palm mutes. Perfect for solos or heavier riffs. That channel shares the same tonestack and dedicated volume as the crunch channel.

The dedicated drive volume affects the sound of these channels in an interesting way. At lower settings, the sound is warmer, and cleaner. But as you increase the volume, the sounds become wilder, more aggressive, with more gain. You can thus fine tune your drive sounds by balancing the master volume and the drive volume, offering a very wide palette of sounds.

Features

Quiet play

The Dual has the special « ultralinear master volume » technology, designed to play at any level, even at very low level at night. That master volume is very progressive, and easy to set even at low level. There is no jump in level like with a typical master volume, and it remains progressive until the end of the course. The amp also has a 20w/2w for the most quiet conditions, with a slight frequency correction in 2w mode to compensate for the bright response of some speakers at low level.

No Bias System

Change your tubes yourself, at home, no equipment needed. Freely choose between 6L6 and EL34 power tubes, you can even mix a 6L6 and an EL34. Procedure is quick, easy, and without risk. This will save you hundreds in maintenance every year, and will allow you to test many tube brands and combinations.

Big tubes

Were other amps uses cheaper EL84 tubes to get 20w, all FX amplifiers uses big EL34 or 6L6 tubes, just like the big 100w stack amps. These big tubes give a more massive sound, with increased bass response, even a low level. BIG TUBES = BIG SOUND!

Smart connections

The head version (and reverse head) features two speaker outputs in parallel, along with a 4/8/16 ohms impedance selector. This allows a variety of possible connections, with one or two cabinets from various impedances.

The combo version offers exactly the same outputs, and the speaker is externally connected (cable included). This allows for multiple smart connections. You can use the internal speaker alone, internal speaker + external cabinet, one external cabinet only, two external cabinets. It also allows the use of an attenuator with internal speaker or external cabinet, and the use of a loadbox for silent recording. Finally you can also use the combo as a cabinet for an external amplifier (In that case, turn off the amplifier section of the combo!!!)

DC tube heating

Heating tubes with DC current is quiter than the usual AC wiring. It takes more time to wire, and it’s a little bit more expensive, but it’s really worth it. Your Fx amplifier is guaranteed to be as quiet as possible.

Big tubes = big sound!

The DUAL, as well as all our amplifiers, uses the same big sized tubes as your favorite vintage stacks. It gives better sounding amps, even a low volumes, with a nice amount of bass, and more than enough punch.

Specifications

Finish : Customers choice.

Controls : Gain/Bass/Mid/Treble + bright + Gain1/Gain2/Bass/Mid/Treble/Volume + Master + loud/quiet.

Features : Tube buffered effect loop, 16/8/4 ohms selector + 2x speaker outputs.

Power : Single ended, Class A, 20w switchable to 2w. Available in 115v or 230v.

Tubes : 4x 12ax7 + 2x EL34. User swappable/mixable EL34/6L6 power tube, no bias needed.

Construction : Point to point, handwired.

Dimensions : 50cm wide, 22cm high, 21cm deep & 13kg.

Recommended speaker : Celestion V-Type or Celestion g12m Creamback.

Gain
Vintage -> Modern

Demos

Some amps we built

]]> https://www.ampsandtubes.com/shop/dual/feed/ 0 Plexi Royale https://www.ampsandtubes.com/shop/plexiroyale/ https://www.ampsandtubes.com/shop/plexiroyale/#respond Fri, 12 Feb 2021 08:48:37 +0000 https://www.ampsandtubes.com/shop/plexiroyale/ Build to Order. Building time : approx [cgv amptime] weeks.]]>

Plexi Royale

We went to great lengths to recreate Page sounds from 69 to 71, when he was using a modified 100w from a famous british company.

The plexi royale is the first amplifier from Fxamps to use our brand new plateform, called RealStack. It aims to offer you the same feeling and sensations as a full blown 100w stack, but in a manageable 20w format.

Big tubes = big sound!

The Plexi Royale, as well as all our amplifiers, uses the same big sized tubes as your favorite vintage stacks. It gives better sounding amps, even a low volumes, with a nice amount of bass, and more than enough punch.

Features

Real Stack

The Plexi Royale introduce the new Real Stack technology. The Real Stack is the natural evolution of our constant quest to recreate the sound and feeling from a big 100w into a more suitable 20w format that modern guitarists can use small gig as well at home.

Super touch sensitive, very reactive to your playing, just like the original.

No Bias System

Change your tubes yourself, at home, no equipment needed. Freely choose between 6L6 and EL34 power tubes, you can even mix a 6L6 and an EL34. Procedure is quick, easy, and without risk. This will save you hundreds in maintenance every year, and will allow you to test many tube brands and combinations.

Big tubes

Where other amps uses cheaper EL84 tubes to get 20w, all FX amplifiers uses big EL34 or 6L6 tubes, just like the big 100w stack amps. These big tubes give a more massive sound, with increased bass response, even a low level. BIG TUBES = BIG SOUND!

Smart connections

The head version (and reverse head) features two speaker outputs in parallel, along with a 4/8/16 ohms impedance selector. This allows a variety of possible connections, with one or two cabinets from various impedances.

The combo version offers exactly the same outputs, and the speaker is externally connected (cable included). This allows for multiple smart connections. You can use the internal speaker alone, internal speaker + external cabinet, one external cabinet only, two external cabinets. It also allows the use of an attenuator with internal speaker or external cabinet, and the use of a loadbox for silent recording. Finally you can also use the combo as a cabinet for an external amplifier (In that case, turn off the amplifier section of the combo!!!)

DC tube heating

Heating tubes with DC current is quiter than the usual AC wiring. It takes more time to wire, and it’s a little bit more expensive, but it’s really worth it. Your Fx amplifier is guaranteed to be as quiet as possible.

Point to point construction

Like all other Fx amplifiers, the Plexi Royale is entirely hand wired, with lot of care, using point to point techniques, and only selected high quality components and part. An amplifier that will not let you down.

Specifications

Finish : Customers choice.

Controls : Gain/Bass/Mid/Treble/Volume + bright.

Features : 16/8/4 ohms selector + 2x speaker outputs in parallel.

Power : Single ended, Class A, 20w switchable to 2w. Available in 115v or 230v.

Tubes : 3x 12ax7 + 2x 6L6. User swappable/mixable EL34/6L6 power tube, no bias needed.

Construction : Point to point, handwired.

Dimensions : 50cm wide, 22cm high, 21cm deep & 13kg

Recommended speaker : Celestion g12m Creamback.

Gain
Vintage -> Modern

Demos

]]> https://www.ampsandtubes.com/shop/plexiroyale/feed/ 0